China Sulfuric acid transfer pump Manufacturers, Suppliers, Factory

Hongzheng is a leading China RLP Type Rotor Pump manufacturers and suppliers. RLP type CAM type rotor pump performance characteristics: ◎ The viscosity of the conveying medium is less than 2 million cp, and the slurry containing 60% solid content; ◎ Flow conveying range :0.1-400m? /h; ◎ Conveying pressure up to 1.2MPa;

A cryogenic centrifugal pump is a type of pump specifically designed to handle and transport cryogenic fluids, which are substances at extremely low temperatures, typically below -150°C (-238°F). These pumps are essential in industries that deal with liquefied gases such as nitrogen, oxygen, hydrogen, and natural gas, among others.

Hongzheng is a leading China Sewage Self-priming Pump manufacturers. Common sewage self-priming pump models are ZW series self-priming sewage pump, ZX series self-priming centrifugal pump, WQD series cutting submersible pump and so on.

Horizontal single-stage chemical pump structure characteristics: 1. The motor and pump body of the horizontal single-stage chemical pump are installed on the same axis to form an integrated structure. 2. The pump body is usually made of corrosion-resistant materials such as cast iron, stainless steel and titanium alloy, which can adapt to various chemical media.

SGZ pulp pump is a type of pump specially designed for the transport of pulp, commonly used in pulp manufacturing and pulp delivery systems. It has the following characteristics:1. High efficiency: SGZ pulp pump adopts advanced design and manufacturing technology, which can efficiently transport pulp. It has a high flow rate and head, can meet the requirements of pulp conveying system.

Double suction middle open pump is a common centrifugal pump, its structural characteristics and application range are as follows: Structural features: 1. Double suction inlet: double suction open pump has two suction inlet, located on both sides of the pump. This design allows the pump to produce counteracting forces on the inlet side, reducing radial and axial forces, and improving the stability and service life of the pump.