Characteristics and applications of pulp pump

Pulp pump is a kind of pump equipment used in pulp, paper and other industries, with good conveying performance, wear resistance, high reliability. In the modern pulp industry, pulp pump is one of the indispensable important equipment. In this article, we will introduce the characteristics and performance of the pulp pump in detail in order to better understand this equipment.

First, the characteristics of pulp pump

1. Good conveying performance

Pulp pump is a kind of pump specially used for conveying slurry, which has outstanding advantages in conveying performance. Compared with the general pump equipment, the flow rate of the pulp pump is larger, and it can effectively transport a high concentration of stock. At the same time, the pulp pump can also adapt to the temperature, pressure and other changes in the working environment, and maintain a stable working state during the transportation process.

2. Good wear resistance

Pulp pumps usually use spiral vane pumps or centrifugal pumps, the inner wall and inlet and outlet of these pumps are specially treated, so that they have good wear resistance. This wear resistance can not only ensure that the equipment runs for a long time without failure, but also extend the service life of the equipment and reduce production costs.

3. High reliability

The structure of the pulp pump is relatively simple, the operation is more convenient, and the maintenance cost is relatively low. At the same time, due to its good wear resistance, excellent transmission performance and other characteristics, so the failure rate is low, high reliability. This also makes the pulp pump an important guarantee for the production process of the factory.

Second, the performance of pulp pump

1. Traffic

The flow rate of the pulp pump is usually set according to the production needs of the factory, which can meet the requirements of different degrees of production process. Flow rate generally refers to the amount of stock that the equipment can transport per unit time, which is crucial for the pulp industry.

2. Lift

Head refers to the total pressure required between the inlet and outlet of the equipment. Pulp pumps usually need to have a certain head to be able to operate normally, and they also need to withstand certain pressure changes in the working environment. Therefore, when choosing pulp pumps, it is necessary to make corresponding choices according to the characteristics of different working environments.

3. Motor power

The motor power of the pulp pump is usually selected according to the power of the equipment and the production process. The larger motor power increases the output capacity of the pulp pump, making it suitable for more demanding production processes. The greater the power of the motor, the heavier the weight of the equipment itself, so it is necessary to maintain good maintenance and maintenance in actual use.

Third, the scope of application of pulp pump

Pulp pump suitable for pulp, paper and other industries in the production process. For example, it is often used to transport materials including wood, waste paper, たわし, hemp fiber and so on. In addition, pulp pumps are also widely used in the manufacturing process of cardboard boxes, paper bags, paper towels and other products, such as wrapping paper processing, special cardboard processing, banknote printing and other fields.

In short, as one of the important equipment in the pulp industry, the pulp pump has the characteristics of good conveying performance, good wear resistance and high reliability. In different production processes, the use of pulp pumps also needs to be reasonably set up according to the process and production needs. Through the introduction of the characteristics and performance of the pulp pump, I believe that readers can better understand this equipment and achieve a more efficient production process.