China Submersible sewage pump Manufacturers, Suppliers, Factory

A horizontal centrifugal pump is a type of pump that uses a rotating impeller to move fluid through the pump. The pump uses centrifugal force to increase the fluid's velocity and pressurize it as it moves through the pump. Horizontal centrifugal pumps are commonly used in industrial, agricultural, and municipal applications for moving water or other fluids. They are often used in applications such as water supply, irrigation, drainage, and wastewater treatment.

Find a huge selection of Multistage Boiler Feed Pump from China at Hongzheng. The multistage boiler feed pump is a single-shell segmented multistage centrifugal pump. The inlet and outlet of the suction are vertical upward. The front section, the middle section and the back section are connected into one body with a piercing bar, and the static joint surface between the sections is mainly sealed by the metal surface, and there is no O-type rubber ring as an auxiliary seal.

Vertical chemical pump is a vertically mounted pump commonly used in the chemical industry. Its design features and application range are as follows:1. Design features:Vertical installation: The pump body and motor of the vertical chemical pump are installed on the same axis, vertically installed inside the container, and the inlet and outlet of the pump are usually located at the top and bottom of the container.

Hongzheng is a leading China Horizontal Pipeline Centrifugal Pump manufacturers and suppliers. The horizontal pipeline centrifugal pump IS designed according to the unique structural combination of IS centrifugal pump and vertical pump, and is designed and manufactured in strict accordance with the international standard ISO2858 and the latest national pipeline centrifugal pump standard JB/T53058-93.

Hongzheng is a leading China RLP Type Rotor Pump manufacturers and suppliers. RLP type CAM type rotor pump performance characteristics: ◎ The viscosity of the conveying medium is less than 2 million cp, and the slurry containing 60% solid content; ◎ Flow conveying range :0.1-400m? /h; ◎ Conveying pressure up to 1.2MPa;

Self-priming clean water pump is a pump that can automatically absorb water, mainly used to transport water or similar liquid pumps. It has the following characteristics: 1. Self-priming capacity: the self-priming clean pump has good self-priming capacity, which can form negative pressure in the pump body, so as to automatically absorb water without additional suction device.