China horizontal centrifugal pump Manufacturers, Suppliers, Factory

Single stage single suction pump is a common centrifugal pump, mainly used to transport water or similar nature of the liquid. Its structure is simple, easy to operate, widely used in industry, agriculture, construction, municipal and other fields.

Self-priming clean water pump is a pump that can automatically absorb water, mainly used to transport water or similar liquid pumps. It has the following characteristics: 1. Self-priming capacity: the self-priming clean pump has good self-priming capacity, which can form negative pressure in the pump body, so as to automatically absorb water without additional suction device.

Hongzheng is a leading China Vertical Condensate Pump manufacturers. Material of main parts: pump body flow parts pump body, pump cover, sealing ring, shaft sleeve material is cast iron, N type condensate pump impeller is silicon brass, induction wheel is aluminum iron bronze.

Double suction middle open pump is a common centrifugal pump, its structural characteristics and application range are as follows: Structural features: 1. Double suction inlet: double suction open pump has two suction inlet, located on both sides of the pump. This design allows the pump to produce counteracting forces on the inlet side, reducing radial and axial forces, and improving the stability and service life of the pump.

A vertical submersible pump is a type of submersible pump that is designed to be installed vertically in a water source, such as a well or a sump pit. It is submerged in the water or liquid, and its motor and impeller are positioned vertically.

Find a huge selection of Multistage Boiler Feed Pump from China at Hongzheng. The multistage boiler feed pump is a single-shell segmented multistage centrifugal pump. The inlet and outlet of the suction are vertical upward. The front section, the middle section and the back section are connected into one body with a piercing bar, and the static joint surface between the sections is mainly sealed by the metal surface, and there is no O-type rubber ring as an auxiliary seal.